Tuesday, December 7, 2010

question about December trees

I cut out fabric last night to start two pairs of trees, and I think I cut them too small, because I started with 6.5 inch wide strips. I think when I sew the two tree seams I will use up about an inch, leaving me with only a 5.5 inch block width. So should I have started with a 7.5 inch width or larger to end up with a 6.5 inch block?
Posted by Linda Big D at 9:28 AM
Labels:

3 comments:

  1. Linda Big DDecember 7, 2010 at 9:35 AM

    my bad. I failed to re-read the link to the basic directions, which state to start with an 8-inch strip. Question answered.

    ReplyDelete
  2. sophieDecember 7, 2010 at 7:12 PM

    I'm sorry I didn't have better directions put together for you, Linda.

    ReplyDelete
  3. Linda big dDecember 8, 2010 at 9:02 AM

    I've been hanging out too much with my darling husband , who never reads directions; must have rubbed off.

    ReplyDelete

Note: Only a member of this blog may post a comment.

Subscribe to: Post Comments (Atom)